Gamma System

+39 011 968 2466


TYPE D5030 S (single channel)

TYPE D5030 D (double channel)

An ATEX safety barrier is a safety system that has been designed for use in potentially explosive environments.

The term derives from the European standards for the safety of equipment used in environments with explosive atmospheres, and indicates that the safety barrier has been designed and tested to meet the specific safety requirements for these environments.

Gamma System is able to offer a series of infrared ATEX photoelectric safety barriers made by microprocessor technology, designed to protect the operator from dangerous parts.

Different solutions are available, in safety level 2 or 4, both with resolution 14 – 20 – 30 – 35 – 40 and 50 mm with range from 0.1 to 17 m, than with low number of beams (from 1 to 4) with range from 0.2 to 60 m, with protected heights from 100 to 1950 mm, all with 24 VDC power supply.

Sono previste funzioni speciali a richiesta quali muting e blanking.

The offer is completed by special solutions as curved version or with a built-in transmitter / receiver to create the so-called "curtain" function or IP67.

The ATEX safety barrier, consisting of a IP65 projector and receiver, easy to install and adjust. The supply can be completed through the adoption of a 4 category safety control unit in case large number of contacts have to be controlled or for output high currents requirements (3 A).

Reference standard EN 13849-1

Contact us

Fill out the form and we will reply
within 24 hours.