The safety mats has been designed and manufactured in accordance with the basic safety and human health requirements. In particular, it is in conformity with the design and construction provisions of the "Machinery Directive" (Directive 89/392/EEC) issued by the European Community Council on June 14, 1989 as amended, and with national implementing legislation, concerning the machines and safety components, and with the "Low Voltage Directive (Directive 73/23/EEC). Furthermore , the following harmonized standards for risk prevention - EN 292-1 and EN 292-2, EN 60 204-1 and EN 1760-1 and EN 954-1.
Gamma System SAFETY MAT is a "safety component" which acts as an "electrical, pressure-sensitive device designed to detect the presence of a human body".
It represents a "safety device equipped with one or more sensors, capable of detecting when a pressure is being applied, and it is combined with a control device with a check function, according to the specific category, and with an output interface
The working principle of the equipment essentially consists in the capacity to cause a change of state of an electric signal when a force, greater than a given intensity, is applied onto the surface of the "safety mat" sensor.
The presence of one or more persons or part of a human body causes a contact located inside the sensor, to make; the making of the circuit to which the contact is connected is worked out by the control device which, in turn, generates the stop command. This command is such to clear the hazardous conditions which have arisen.
-
TECHNICAL SPECIFICATIONS Upper layer made from black, embossed PVC Upper covering made from black, embossed PCV with a Lexan plate Upper covering made from Aluminium
Thickness 14 mm Max 16 mm Max 17 mm Max
Weight/m² 12 Kg/m²(approx.) 15Kg/m²(approx.) 17Kg/m²(approx.)
Activating force < 300N with 80mm fl test piece
Max. allowable load 60 Kg/cm²
Output conctat No
Operating temperature -10° +60°
Degree of protection IP65
Mechanical life of inner conctat 5.000.000 operations
Activation time 38 ms
© 2004 gamma system - made by interattiva - powered by Kleis C.T.
-
pressure safety edges
| safety control units
| pneumatic ejector
| pressure sensitive edges
| roller lubrificators
| safety mats
|
| sensitive bumpers
| silenced nozzles
| safety bumpers
GAMMA SYSTEM 10044 Pianezza / TO Via Torino, 24/I Tel. +39 011 968 24 66 r.a. Fax +39 011 967 42 11 e-mail: infoinfo@gammasystem.comgammasystem.com
www.gammasystem.com
-------------------------
|
|
